Water evaporates normally from your swimming pool, so it might be difficult to detect a water leak. The number of evaporation changes depending on the weather, but if it seems like you have to fill your pool more often than usual, you might want to call a pool leak detection company to know what's going on. Repairing a leak is important or you'll waste money on filling your pool too often. Here's how to prepare for pool leak detection and how the company might look for the leak.
Start With a Clean and Full Pool
Finding a leak isn't easy sometimes, and if your pool is dirty, it's easy to overlook a small hole or crack. Help the pool leak detection company by cleaning the sides and bottom of the pool and making sure the water is crystal clear before your appointment. The water level should be full too because if the leak is near the top of the water level and the water is too low, the leak detection company may not find the leak.
Have a Physical Examination Done
Your leak detection professional might use scuba gear so they can spend time along the bottom of your pool to look for a leak. They'll look around the drain, lights, skimmer, and other likely places. The pool professional may also look for cracks in concrete pools and holes or rips in vinyl liner pools. A professional knows areas of the pool where leaks are most likely to develop so they can narrow down the source of the leak. They might use dye as they search your pool since dye will be pulled toward the leak and provide a clue for them to follow.
Test the Pool Plumbing
It's common for the pool plumbing to leak just as the plumbing in your home can spring a leak. The pool leak detection can test for leaks by doing a pressure test that lets the plumber know if there is a leak somewhere. One end of the plumbing is closed off when the pipes are filled with air or water. If there is no leak, the pressure stays steady in the pipes. If the plumbing is leaking, the pressure drops and alerts the pool professional the plumbing needs to be repaired.
Use Listening Equipment
Pool leak detection equipment is used by professionals to find leaks. These can detect leaks using sound. The professional might put a probe in the soil to listen for a leak or they might drop a probe in the water. The sound changes when the probe gets closer to the leak, so this equipment is a good way to find hidden and hard-to-find leaks in a swimming pool.
Share